Just wondering, are there spare screw sets for purchase, or are the screw sizes published somewhere? I would like to have some screw sets as a backup just in case if I had to open my keyboard and accidentally striped a screw or two.
I found that #6-32 x 1/2″ screws for the outer case and #6-32 x 1/4″ socket cap screws work well. They take a 7/32″ hex driver. So less worrying about stripping the head.
Yes you can purchase them from me – please email me for current pricing and to confirm availability. All are Pan Head screws. You can also purchase them locally or online for a low cost, probably lower than my cost. Always apply firm pressure to the screw with the screwdriver and use the correct bit (Phillips #1 PH1 for compact case screws and PH2 for classic style case screws and controller ground screws). Do not overtighten or the screw will strip. The small screws are far more likely to strip if the screwdriver slips.
6/32 x 3/16 in – controller and P clip screws (total 3)
6/32 x 1/2 in – classic style zinc case 4 screws
M2.5 x 4mm – compact case 4 screws to attach bottom inner assembly to case
M2.5 x 20mm – compact case 12 screws